How to Remove Mold on Painted Walls and Ceiling

Photo Credit: Thrifty Fun

You will want to take a look at this short video on How to Remove Mold from Painted Walls and Ceiling. Mold grows wherever there is a moist environment, bathrooms, and other humid areas provide the perfect spot for mold to grow on the walls and ceilings. There are different ways to deal with mold, and you will want to know how to remove mold, mould, can cause respiratory problems in people. The dangers of mold in your home is that it is not healthy to breathe in, and you want to remove it as soon as possible. There are different techniques to getting rid and how to remove mold, mould from bleach water ratio to kill mold, household bleach, and commercial cleaners. The short video is on how to remove mold, mould from painted walls. According to the CDC, mold spores can find their way into your home from outside through open doorways, open windows or heating and cooling systems with outdoor intakes. Mold spores can also attach themselves to your clothing or onto your pets and be brought inside your house. Once inside, mold spores thrive and grow in moisture rich places, making the bathroom an especially popular place where you will find them. Mold not only looks bad when it starts to grow in your home, but it can cause problems for people when they are inhaled, especially for people with asthma.

Some of the prevention tips on how to remove mold, mould from your home include properly ventilating your bathroom when you are taking a bath or shower. You also want to keep humidity levels in your house to between 40 percent to 60 percent by using an air conditioner or dehumidifier during the humid months. How to remove mold, mould from your home to avoid the dangers of mold in your home can include using two products that you can buy at your local home improvement store. The how to remove mold, mould products include Mold Armor Mold Blocker and Mold Armor Mildew and Mold Remover. You need to be especially careful when you use these mold remover products. You'll want to wear a mask, eye protection, rubber gloves and use a ladder.

Be sure to avoid leaving the Mold Armor Mildew and Mold Remover product on vinyl windows or plastic shower enclosures for more than 15 minutes. Also, make sure when using these mold remover products to open your windows and turn on the bathroom fan so that you have good ventilation. To start spray the Mold Armor Mildew and Mold Remover directly onto the mold and let it sit for approximately 30 minutes. After 30 minutes, use a wet sponge and wipe off the mold area. Most of the mold should be gone. If any of the mold remains, reapply the spray again and then wipe it with a wet sponge after about 30 minutes. The last step on how to remove mold, mould is again spraying the mold affected areas with the Mold Armor Mold Blocker.

To make your homemade mold remover, you can use a bleach water ratio to kill mold. The bleach water ratio to kill mold is about one cup of bleach to one gallon of water. To use the household bleach mixture wear rubber gloves, spray the affected area and using a sponge or a rag to remove the mold from the wall. The household bleach mixture will require a little more elbow grease than the store bought removers, but the household bleach mixture will work. This short video on how to remove mold, mould from painted walls and ceiling is just one of the dangers of mold videos on the "Thrifty Fun" site. On the site you will find all sorts of topics from budget and finance, better living, consumer advice, healthy and beauty, pets, food and recipes, garage sales, home and garden and more. *

Learn MORE at Thrifty Fun

To help with slow website load, we have put all photos for this article here: View photo gallery.

Privacy Policy